How Insulation Systems Work to Reduce Heat Loss

A well-insulated home can significantly reduce your energy bill and ensure your comfort all year. Understanding how the mechanism works and the role of insulating systems in reducing heat loss can help you improve your property’s energy efficiency.

How Insulation Systems Work

The material that is used to insulate buildings works as a barrier that hinders heat transmission inside and outside your property. If it works well and is installed properly, insulation can keep your house warm in the winter and cool during the summer without the need for artificial solutions. This is why insulated properties are more energy and cost-efficient.

The Science

To understand how that happens, we must understand how heat is transmitted through buildings. Generally, it flows towards a lower temperature which is why a poorly insulated home loses heat fast. It escapes through any opening in your walls, roof, windows, and even the floor.

The heat is transmitted through construction material via conduction, a natural phenomenon that occurs via direct contact. In homes, metal is the best heat conductor, and so are masonry and concrete, while wood is a poor conductor.

Your home can also lose heat via convection which occurs in liquids and gases. This occurs if a hot surface is exposed to cold air, which warms up and loses density. Warmer and lighter air rises and is replaced by cold air. This cycle repeats to maintain the temperature of a space and reverses if warm air touches a cold surface. In homes, convection occurs in walls and roof cavities where insulation foam is injected.

This is the role of insulating systems. A well-insulated home will keep warm air in and keep cool air out.

The Role of R-Values

Insulating material is only as good as its R-value. That is its resistance to conductive heat flow, which is measured according to its thermal resistance. A high R-value means higher insulation efficiency. However, moisture retention rates, aging, and temperature can also affect this value. So when determining the R-value of installation material, remember to add each layer’s values.

You can increase your home’s R-value by adding more insulation. The thicker the insulation, the warmer your family will be. However, you should consult with professionals beforehand. The density of insulation can increase when it is compressed under its weight. This is why loose-filled insulation does not alter with thickness.

The efficiency of its heat resistance also depends on its location. For instance, if it is compressed, the insulation material may not be able to provide the same or more R-value than the R-value of your walls. This is because heat also flows via thermal bridging, i.e., through studs and other construction materials. Insulation material that is filled into your property’s cavities will reduce airflow and prevent hot air from escaping, saving energy.

Contact Pure Eco Inc. for Heating Solutions

Contact us at Pure Eco Inc. for a consultation if you are searching for heating solutions or insulation services that can reduce your energy bill. We offer a wide range of insulation solutions that meet your needs for crawl spaces, attics, building cavities, new construction, and more. Get a free quote by contacting us at (877)870-7998.


Insulating Your Home: A Homeowner’s Guide

Want to be more comfortable in your home year-round while using less energy? Insulation, when coupled with air tightness, is one of the simplest and least expensive solutions to preparing your home for the changing seasons. These improvements will make your home more pleasant to live in and may even increase its market value.

Understanding home insulation requires knowing where and when to add these improvements to your home. Here are some areas in your home that need insulation:

Attic insulation

Since hot air rises, the attic is one of the best spots to add insulation to your home. Without adequate attic insulation, all of your warm or conditioned air will climb to the ceiling and escape throughout the winter. Your electricity bills will skyrocket since you’ll have to keep the heat on all day long, but your home won’t heat up properly.

This also means that your summer energy costs will increase. However, before beginning insulation, it’s important to evaluate the current insulation in the attic, tidy up the area, ensure good ventilation, and learn about the various insulation solutions.

Wall insulation

Both the walls inside and outside your home should be well-insulated. By insulating the external walls, you can keep the air inside from being displaced by the outside air. Insulating the walls inside helps maintain a stable temperature throughout your residence. You won’t have to worry about any more extreme temperature differences between rooms.

An insulation contractor setting up thermal insulation

Blown-in fiberglass insulation is a good choice for insulating the inside of a finished home since it leaves minimal dust and debris behind. Installation utilizing the dense pack method maximizes its effectiveness. Wall insulation not only reduces your monthly energy costs but also provides additional privacy by dampening outside noise.

Floor insulation

If you’re still uncomfortable year-round despite having adequate insulation and air sealing in your walls and roof, the issue is likely with your flooring. Insulate your flooring if you find that the temperature varies in different areas. Not only does floor insulation reduce energy costs, but it also blocks out noise. The noise-reducing benefits of insulation are excellent for thermal envelope multi-level homes.

Tip: In order to prevent cool air from escaping through the ceiling when insulating over an unheated garage, it is necessary to first block any vents and openings.

Get top-notch insulation services in California

At Pure Eco Inc, our expert insulation contractors ensure your home’s insulation is performing at its peak levels. We’ve got you covered for everything from high-quality attic insulation to duct cleaning and attic fan cleaning in Tarzana, Tujunga, and West Hills, CA.

Reach out to us if you need insulation services.


Blown-In vs. Sprayed-On Insulation: Everything You Need To Know

When it comes to attic insulation, there are many different methods out there. Two of the most common ones are blown-in and sprayed-on attic insulation. However, if you are confused between the two, you are not alone.

Most homeowners, especially the ones who are installing attic insulation for the first time, have trouble deciding which type of insulation is best for them. Installing attic insulation is vital, and you can choose between the types that suit you best.

Therefore, if you want to learn the differences between both types of insulation, you are in the right place. This blog will help you learn everything you should know.

Blown-In Insulation

Blown-in insulation refers to the process of blowing the insulation material into the attic, walls, and floors. It is available in several materials and has its pros and cons. The installers use advanced blower technology to complete the insulation process.

The different materials used in blown-in insulation are fiberglass, cellulose, and wool. It offers many benefits. For instance, it covers hard-to-reach places and does not leave any gaps. Plus, it is more cost-effective and has many applications.

Sprayed-On Insulation

Sprayed-on insulation expands, filling in any gaps and voids. It creates a protective barrier, which is great as it eliminates any chances of air pockets forming.  It is a very popular option and is done best by professionals.

It can be applied to walls, attics, and floors and is a flexible option. Plus, it offers a higher R-value.


Blown-In vs. Sprayed-On Insulation: The Bottom Line

Both options have their unique qualities, so it depends on your needs. If you work with a professional, like the ones at Pure Eco Inc, they can guide you along the way, recommending the type of insulation that will work best for you.

Call in Our Professional Attic Contractors Today!

Now that you know which type of attic insulation is best for you, let our experts do the rest.

Reach out to Pure Eco Inc. for all kinds of attic insulation services. Based in Los Angeles, we are a leading name in the insulation service industry. We have years of professional experience, and our certified and licensed insulation contractors are ready to serve you.


Pros of Insulating your Home for the Winter

Here are some pros of insulating your home for the winter!

PureEcoInc 10thMonth 1stInfo

Effective Ways to Insulate your House

Here are some effective ways to insulate your house

pureecoinc 1info 01
pureecoinc 1info 01
mersin escort - escort bodrum - eskişehir escort - escort mersin - escort